Introduction
The Ubiquiti PowerBeam 5AC Gen2 (PBE-5AC-Gen2) is a next-generation wireless bridge, offering high-speed, long-range wireless connectivity for enterprise, ISP, and industrial applications. As part of Ubiquiti’s airMAX AC series, it incorporates cutting-edge RF technology and improved interference resistance, making...
The Ubiquiti PowerBeam 5AC Gen2 (PBE-5AC-Gen2) is a next-generation wireless bridge, offering high-speed, long-range wireless connectivity for enterprise, ISP, and industrial applications. As part of Ubiquiti’s airMAX AC series, it incorporates cutting-edge RF technology and improved interference resistance, making it a powerful and reliable solution for demanding wireless networks.
With a 25 dBi integrated dish antenna, an optimized radio design, and enhanced spectral efficiency, the PowerBeam 5AC Gen2 delivers exceptional performance in high-interference environments.
Key Features and Benefits
1. airMAX AC Technology for Superior Wireless Performance
The PowerBeam 5AC Gen2 leverages airMAX AC TDMA protocol, offering: ✔ Higher throughput (450+ Mbps real TCP/IP speeds) ✔ Lower latency for VoIP, streaming, and remote access ✔ Better spectral efficiency and noise isolation ✔ Improved performance in dense RF environments
This makes it ideal for service providers, enterprises, and industrial networks requiring high-speed, interference-resistant wireless links.
2. Integrated 25 dBi High-Gain Dish Antenna for Long-Distance Connectivity
✔ Extended range and stable performance over long distances ✔ Focused beamwidth for improved noise rejection ✔ Optimized gain-to-size ratio for enhanced efficiency
The parabolic dish design ensures minimal signal loss and maximum link stability.
3. 450+ Mbps Throughput for High-Bandwidth Applications
With support for wide channel bandwidths (up to 80 MHz), the PowerBeam 5AC Gen2 enables: ✔ Ultra-fast file transfers and cloud access ✔ Seamless HD/4K video streaming ✔ Low-latency VoIP and conferencing
4. Advanced RF Filtering for Noise Reduction
The PowerBeam 5AC Gen2 features: ✔ Dedicated metal reflector for enhanced signal isolation ✔ Superior noise rejection in congested areas ✔ Reliable performance even in urban environments
5. Intuitive airOS and Mobile-Friendly Bluetooth Management
✔ Easy setup and configuration via airOS ✔ Bluetooth support for quick setup with the UMobile app ✔ Real-time performance monitoring and spectrum analysis
6. Gigabit Ethernet Port for High-Speed Data Transmission
✔ Ensures no bottleneck between the radio and network ✔ Supports high-capacity backhaul links ✔ Improves overall network efficiency
7. Durable, Weatherproof Design for Outdoor Deployment
✔ Rugged UV-resistant enclosure ✔ Wind-resistant up to 200 km/h (125 mph) ✔ IP-rated protection for harsh environments
8. Tool-Free Assembly for Easy Deployment
✔ Lightweight, compact design for effortless mounting ✔ Pole-mounting hardware included ✔ LED indicators for precise alignment
Technical Specifications
General Specifications
Model: Ubiquiti PowerBeam 5AC Gen2 (PBE-5AC-Gen2)
Processor: Atheros MIPS 74Kc
Memory: 128 MB RAM, 16 MB Flash
Frequency Band: 5 GHz
Max Throughput: 450+ Mbps
Antenna Gain: 25 dBi
Channel Widths: 10/20/30/40/50/60/80 MHz
Ethernet Port: 1 x 10/100/1000 Mbps
Power Supply: 24V, 0.5A Gigabit PoE
Physical and Environmental Characteristics
Dimensions: 420 x 420 x 230 mm
Weight: 1.753 kg
Operating Temperature: -40°C to 70°C (-40°F to 158°F)
✔ Wireless fiber extension for remote locations ✔ Cost-effective backhaul for ISPs and enterprises ✔ Connecting campuses, warehouses, and rural sites
2. Wireless Internet Service Provider (WISP) Networks
✔ Reliable client connections in PtMP setups ✔ Scalability for growing networks ✔ High-speed internet distribution over long distances
3. Surveillance and Security Systems
✔ Wireless IP camera connectivity ✔ Remote monitoring and control ✔ Stable data transmission for security networks
4. Industrial and Enterprise Networking
✔ Wireless office interconnections ✔ Low-latency cloud-based applications ✔ Remote access for industrial control systems
5. Smart Agriculture and IoT
✔ Remote sensor and IoT connectivity ✔ Wireless data collection over large farms ✔ Automated irrigation and monitoring systems
Installation and Configuration Guide
Step 1: Unboxing and Hardware Preparation
Ensure all components are included: ✔ PowerBeam 5AC Gen2 unit ✔ Pole mounting hardware ✔ PoE adapter and power cord
Step 2: Mounting the Device
✔ Attach the dish reflector to the radio unit ✔ Secure the unit to a pole using the included bracket ✔ Adjust alignment for maximum signal strength
Step 3: Connecting Power and Network
✔ Connect an Ethernet cable from the PowerBeam 5AC Gen2 to the PoE adapter ✔ Use a second Ethernet cable to connect the PoE adapter to a router, switch, or computer ✔ Plug in the power supply
Step 4: Configuring the Device
✔ Access airOS via a web browser or UMobile app ✔ Set the device as a Station (client) or Access Point ✔ Configure SSID, encryption, and channel width
Step 5: Optimizing Performance
✔ Use the airView spectrum analyzer to find the best channel ✔ Adjust antenna alignment for peak signal strength ✔ Monitor link quality and network performance
Conclusion
The Ubiquiti PowerBeam 5AC Gen2 (PBE-5AC-Gen2) is a high-performance, long-range wireless solution, featuring airMAX AC technology, a high-gain 25 dBi antenna, and advanced RF filtering. With 450+ Mbps throughput, weatherproof durability, and intuitive mobile-friendly management, it is the ideal choice for ISPs, enterprises, surveillance systems, and remote networking applications requiring ultra-fast, interference-free wireless connectivity.
Need help?
Talk to an expert about Ubiquiti PowerBeam Gen 2 5AC 5GHz Bridge
Get guidance on setup, compatibility, and delivery tailored to your needs.
